Arthobby.com
Avatar 3.4M - light weight electro-glider F5J class. It's clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1600 g (~56 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition.
The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
The fuselage pod features removable canopy for easy access to radio and drive gear and is 2.4GHz friendly.
Its strong tapered tail boom is made of carbon-glass-fiber composite.
The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, precut pockets for the spoilers and internally hinged ailerons are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.
Kit contains:
model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
NOTE: Wing version with Aileron and Flaps is also available.
7+ch.
7+ch. Optima-7/9, Maxima-9, similar
2 x HS-5065MG, HS-5070HD
2 x HS-65HB
1 x HS-5065MG
1 x HS-5065MG, HS-65MG
ART-2400, ART-2600
50A - 54A
40mm LD
16x8 CAM
1550 - 2200 mAh, 3S LiPo
The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
The fuselage pod features removable canopy for easy access to radio and drive gear and is 2.4GHz friendly.
Its strong tapered tail boom is made of carbon-glass-fiber composite.
The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, precut pockets for the spoilers and internally hinged ailerons are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.
Kit contains:
model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
NOTE: Wing version with Aileron and Flaps is also available.
Wing span
Length
Wing profile
Wing area
Glider weight
Flying weight
Wing load
Length
Wing profile
Wing area
Glider weight
Flying weight
Wing load
3400 mm / 133.85 in.
~1500 mm / ~59.05in.
SD7080-modified
55.44 dm² / 859.32sq.in.
~970 g / ~34.03 oz.
~1600 g /~ 56.14 oz.
~28.86 g / dm²
~1500 mm / ~59.05in.
SD7080-modified
55.44 dm² / 859.32sq.in.
~970 g / ~34.03 oz.
~1600 g /~ 56.14 oz.
~28.86 g / dm²
Recommended
Radio
Receiver
Ailerons
Spoilers
Elevator
Rudder
Motor
ESC
Spinner
Propeller
Battery
Radio
Receiver
Ailerons
Spoilers
Elevator
Rudder
Motor
ESC
Spinner
Propeller
Battery
7+ch.
7+ch. Optima-7/9, Maxima-9, similar
2 x HS-5065MG, HS-5070HD
2 x HS-65HB
1 x HS-5065MG
1 x HS-5065MG, HS-65MG
ART-2400, ART-2600
50A - 54A
40mm LD
16x8 CAM
1550 - 2200 mAh, 3S LiPo
Recommended Accessories
Replacement Parts